top of page

PC Building Simulator 2 Update v1.85

Hello PC Builders!


Today’s update brings us to patch version 1.85. You can find a list of the addressed issues below, special thanks to the community for contributions to bug reporting and evidence gathering.



Bug Fixes

General

  • The garden no longer disappears when viewing from the bench next to the office PC.

  • The "Watercooled" filter option has been added to the Memory inventory menu.

  • Camera panning no longer occurs behind the open inventory menu.

  • Removed the prompt for zooming on the monitor when entering the lighting app.

  • Fixed the ability to back out of installing a part to remove the collision detection on parts.

  • Changing the color of the lighting in the MSI theme will no longer cause text artifacts to remain on screen.

  • Audio is no longer played when holding the button to rotate a PC but not moving the mouse.

  • Dust SFX is no longer hindered by rotating a PC.

  • Radiators in the be quiet! Silent Base 600 cases no longer clip through the chassis.

  • The red LED of the Cooler Master MasterCase Maker 5t is now inside the case.

  • Monitors can no longer be used if there is not a mouse connected to the PCs.

  • Static VFX in the Apocalyptic theme no longer disappears after a period of time.

  • Fixed flickering that occurs when looking at the MSI theme through the Decorator App.

  • The paint cursor no longer duplicates on the EVGA DG-86 and EVGA DG-87 cases.


Parts

  • The NZXT F Series 120mm RGB is no longer displayed as a 140mm fan.

  • Aligned the thermal paste placement on the ASUS ROG STRIX GeForce RTX 2060 SUPER GPUs.

  • Radiators can no longer be installed in the bottom slot of the Raijintek NYX PRO (White) case.

  • Pump reservoirs can now be installed in the Raijintek NYX PRO (White) after a motherboard.

  • Removed 90 degree radiator rotation to avoid radiators causing issues with many cases.

  • The Palit GeForce RTX GamingPro GPUs are now all named correctly.

  • The ASRock Z390M-ITX/ac motherboard no longer has a screw missing.

  • Fixed the naming of the MSI MEG Z490I UNIFY Motherboard.

  • Coloured connectors now have an icon in the shop basket.

  • Corrected the thumbnails for case components across the majority of cases.

  • Small floating geometry has been removed from the CORSAIR Obsidian Series 500D case.

  • The front panel of the CORSAIR Obsidian Series 500D now animates when removed.

  • Fixed texturing of the CORSAIR Obsidian Series 500D case.

  • The screws for the 3.5" bays in the CORSAIR Obsidian Series 500D are now removed with the case part.

  • The IO cover is no longer missing on the CORSAIR Obsidian Series 500D case.

  • Customizing the SilverStone LD03 no longer leaves black dots on the case.

  • Fixed geometry of the EVGA DG-80 cases.

  • The EVGA DG-86 now has the correct texturing on it's side panel.

  • The vertical GPU slot can now be used in the Antec P110 Luce case.

  • Stopped the Fractal Meshify 2 Compact case always displaying as incomplete.

  • VRM no longer clips through the GeForce GTX 1080 EKWB EK-FC Plexi watercooled GPU.

  • Pump Reservoirs no longer clip through the InWin ModFree Deluxe case.

  • The EVGA GeForce GT 1030 SC no longer clips through the PSU shroud of the Kolink Stronghold cases.

  • 2.5" drives can now be installed in 3.5" slots in the CORSAIR iCUE 220T cases.

  • The EKWB EK-FC GeForce GTX block is now positioned better on the NVIDIA GeForce GTX 1080 Ti Founders Edition GPU.

  • The fan hub of the Fractal Design Vector RS TG now works.

  • The vertical GPU slot can now be used in the Fractal Design Vector RS TG case.

  • The Antec P6's dust filter now appears as a mesh.

  • The dust filter of the Pure Base 500 no longer appears corrupted.

  • The PCI covers of the AZZA Opus 809 are now animated when removed.

  • Watercooling the NVIDIA GTX 1080 Ti now only removes the power connector for blocks that need it.

  • Added the numbers on the drive bays of the GamerStorm NEW ARK 90.

  • Added icons to the IO panel of the GamerStorm TRISTELLAR SW case.

  • Limited the height of allowed pump reservoirs in the Raijintek NYX PRO (White) case.

  • Case Customisation is now higher resolution on the GamerStorm TRISTELLAR SW case.

  • Replaced missing sticker on the back of the CORSAIR Crystal Series 280X RGB cases.

  • AIO coolers and GPUs can now be installed in the SilverStone LD01 case together.

  • The SSDs at the back of the EVGA DG-84 and DG-85 cases no longer clip into the chassis.

  • The Cooler Master MasterCase Maker 5t case no longer has missed points when customizing.

  • 140mm fans no longer clip with the dust filter of the Pure Base 500DX case.

  • The USBs of the Lian Li 011D XL case are now functional.

  • The USBs of the MSI MPG Gungnir 110R case are now functional and aligned correctly.

  • Multiple 2080 GPUs are no longer missing textures on the PCI connectors.

  • Small GPUs no longer clip when installed in the SilverStone CS381 case.

  • The drive bay panel frame of the Fractal Design Vector RS TG now blocks the appropriate fans unless moved.

  • The Endorfy Navis F AIO CPU blocks no longer have double screws.

  • Aligned GPUs in the CORSAIR Crystal Series 280X RGB cases.

  • The LEDs of M.2 storage now turn off with the rest of the PC.

  • The CPU will no longer clip through a monoblock installed on the NZXT N5 Z690.

  • Fixed the logo on the Antec High Current Gamer Extreme Series PSUs.

  • 140mm radiators are now screwed into screw holes of the CORSAIR Obsidian Series 500D case.

  • Adjusted the radiator positioning in the Fractal Design Meshify C cases.

  • The fan hub of the Dark Base 700 no longer has graphical issues.

  • Fixed motherboards being removable with a vertical GPU connected in the GamerStorm NEW ARK 90 case.

  • Visuals on the EVGA DG-86 & DG-87 no longer corrupt when the PC is powered.

  • 140mm radiators can no longer be installed in the rear of the NZXT H210i cases

  • Fixed SSDs clipping through the side panel of the Phanteks Eclipse G360A DRGB cases.

  • The vertical GPU slot in the GamerStorm NEW ARK 90 case no longer becomes unresponsive.

  • Fixed GIGABYTE AORUS GeForce RTX 2080 thumbnails being irregular.

  • USB slots of the GamerStorm TRISTELLAR SW now appear the same as the real case.

  • The dust filter of the Fractal Design Meshify 2 TG cases are now a mesh material.

  • Changed the names of the Fractal Design Meshify C cases to be consistent.

  • Case customisation no longer appears on the glass panel of the be quiet! Pure Base 500 cases without "Apply on Glass" active.

  • Vertical GPUs can now be powered in the ASUS ROG Strix Helios case.

  • The power connectors of the Sapphire Nitro+ AMD Radeon RX 7900 XT Vapor-X GPU are now correctly aligned.

  • Radiators installed in the rear of the SilverStone RL08 (White) no longer clip through the PSU Shroud.

  • GPUs with 3 PCI brackets will no longer fit in the Raijintek NYX PRO (White) case.

Cabling

  • The Alphacool Eisstation DC-Ultra's cable is no longer dis-connected from the pump model.

  • GPUs in the bottom slots of a motherboard in the CORSAIR Obsidian Series 500D case can now be cabled.

  • Cables no longer path through the GPU in the NZXT H7 cases.

  • SATA cables route more naturally on the OBT cases.

  • SSD cables no longer clip through the InWin DUBILI case.

  • Fans installed in the Antec Crystal case can now be cabled with specific motherboards.

  • Fixed the default watercooled PC in freebuild not being cabled.

  • Fans installed in the Kolink Stronghold case can now be cabled with specific motherboards.

  • Re-routed cables inside the GamerStorm TRISTELLAR SW case.

  • All PSUs can now be cabled up inside the Antec P8 case.

  • The back fan in the Fractal Design Meshify C can now be cabled with specific motherboards.

  • Cable clipping issues have been fixed with specific motherboards in the CORSAIR Crystal Series 280X RGB cases.

  • SSD cables no longer clip through the EVGA DG-80 cases.

  • Cables no longer clip from the motherboard in the CORSAIR Crystal 570X RGB case.

  • The riser cable in the AZZA Opus 809 is no longer twisted.

  • The ASRock B550M-IT/ac can no longer be installed in the InWin A1 case.

  • Non-Modular PSU cables are now shorter when uninstalled.

  • USB cables no longer clip through the chassis when installed in the front of the Fractal Design Meshify 2 Compact case.

  • The default PCs in freebuild no longer spawn with cables missing.

  • All fans in the CORSAIR Graphite Series 380T cases can be cabled using the ASRock Z390 Phantom Gaming ITX/ac motherboard.

  • Fixed 8 pin cable clipping inside the CORSAIR iCUE 220T cases.

  • The GPU power cable no longer routes through radiators installed in the NZXT H510 cases.

  • Re-routed the external cables when attached to the Kolink Observatory Z.

  • Fans can be connected inside the Cooler Master MasterBox NR200P cases.

  • Cables from the PSU no longer clip into the drive bay of the GamerStorm TRISTELLAR SW case.

  • Added a visual only cable to the LED logo on the PSU shroud of the GamerStorm NEW ARK 90 case.

  • Re-routed 24 pin cables in the  NZXT H7 Elite case.

  • Re-routed cables in the MSI MPG Gungnir 100 case.

  • Re-routed cables inside the CORSAIR Graphite Series 380T cases.

  • 24 pin cables no longer clip with HDDs in the Cooler Master MasterBox NR200P case.

  • SATA cables no longer clip with HDDs in the Cooler Master MasterBox NR200P case.

  • Fixed the fan hub of the MSI MPG Gungnir 100 case not being connectable.

  • Fans can now be cabled in the FSP CMT520 Plus case.

  • Fixed some PSUs not being connected in the MSI MAG Vampiric 010 case.

  • The fan hub cable can be fully connected in the MSI MAG Vampiric 010 case.

  • The riser cable no longer appears twisted in the ADATA XPG Battlecruiser case.


Apps

  • Fixed Cinebench breaking outside monitor bounds.

  • Photo Mode app now fills the Tablet screen.

  • Decorator slider no longer varies in size when cycling through decorations.

  • Installing an app now only causes the boot drive to fluctuate in power consumption.

  • CPU coolers appear connected to the PC when looking through the Thermal App.

  • The Cold Warning sticker no longer has a visible border when used in the Photo App.

  • Deleting emails no longer causes issues with the inbox tab.


Controller

  • Buttons for panning the camera on controller are displayed more accurately.

  • The "Sort By" dropdown in the inventory can now be navigated to on controller.

  • Moving the mouse no longer blocks controller interactions in the options menu.

  • The "Link to Job" controller prompt now appears when highlighting an item in the inventory.

  • Tutorials for the paint case job are no longer blocked when using controller.


Keep in touch!

Want to talk with us and the community? We’d love to talk to GPYOU! Join us on all of our official platforms here:

Cheers,

The PC Building Simulator Team


Comentarios


bottom of page