top of page

PC Building Simulator 2 | Patch v1.15

Hello PC Builders!

Today’s update brings us to patch version 1.15. You can find a list of the addressed issues below, special thanks to the community for contributions to bug reporting and evidence gathering.

Bug Fixes


  • Updated Unity Engine version to 2022.1.15f1.

  • Added a check to see if there is an active AIO before proceeding with BSOD for empty pump.

  • Adjusted the camera orbit settings of bench tools.

  • Motherboards now list how many PCI slots they have, and a filter has been added for this.

  • GPUs now list the max amount of that GPU compatible with a single build, and a filter has been added for this.

  • Adjusted the EVGA posters and thumbnails.

  • Added more collisions to the workshop floor.

  • Updated PC Generation to not output a PC if the generated piping extends out of bounds of pipe pathing.

  • Deleted air con unit from Medieval theme wall.

  • Moved objects in Contemporary theme to prevent clipping with Medieval theme.

  • Moved objects in Vintage theme to prevent clipping with Medieval theme.

  • Moved objects in PCBS1 theme to prevent clipping with Medieval theme.

  • Moved objects in the Medieval theme floor to prevent clipping with the Space theme.

  • Moved lighting in the Medieval theme to prevent clipping with the Space theme wall.

  • Added cable size to the total of GPU width so GPUs with cables that would cause issues are no longer compatible.


  • Improved collision for reservoir and drive bays on the Lian Li 011D XL-W.

  • Fixed case collider transforms on the Adata XPG Battlecruiser causing the dynamic fan flipping checks to be out by 90 degrees.

  • Adjusted the first occupied vertical PCI slot so that 3 slot GPUs have 3 vertical PCI slots in sequential order in the Lian Li 011D XL-X case.

  • Addressable RGB added to Antec Fusion 120mm ARGB.

  • Max reservoir height value reduced on Lian Li 011D XL-X case.

  • Adjusted the position of the VIRO PLUS headsets on the desk.

  • Corrected the values of AM5 CPUs to have 2 dies.

  • Updated thumbnails for Hydro X series water-cooled GPUs.

  • EKWB FC2080 RTX Classic D-RGB GPU block compatibility corrected.

  • Removed the incorrect 3rd fan from the bottom of the Corsair Obsidian Series 750D case.

  • Added 180mm fans to the Fractal Design Torrent case.

  • Added slot for M.2 to the ROG Zenith II Extreme Alpha motherboard.

  • Changed the drive bay cover movement on the Gigabyte X570I Aorus PRO Wifi to prevent clipping with RAM.

  • Added support for 120 mm radiators to be able to have 2 side by side at the top of the HAF 700 EVO case, but 240mm radiators will only allow a single one in the centre of the roof.

  • Added red and white RGB to Cooler Master Hyper 212 LED coolers.

  • Raised the camera angle when the Kolink Observatory case is on the bench.

  • Separated fan slots in HYTE Y60.

  • Added selection of max depth on a PCI slot to refine allowed GPUs in the SilverStone LD01 case.

  • Alphacool Eisblock GPX-N Plexi GPU block compatibility corrected.

  • Turns off the NZXT Kraken Z63 display when the component is no longer active.

  • Modified the preview window for components of the Cooler Master MasterBox NR200P Sakura cases to display correctly in the inventory.

  • Improved compatibility for vertical mounting the NVIDIA RTX 4090, allowing installation in more cases e.g Lian Li 011D XL-X.

  • The radiator slot moved in the Lian Li O11D XL-X case to stop clipping with a dust filter.

  • Aligned paste and thermal pads on ZOTAC GAMING GeForce RTX 2080 Super Twin Fan GPU when water-cooling.

  • Realigned fan blades on Antec Mercury 120 RGB AIO.

  • Changed adjustments and coefficients for multiple intel CPUs in order to ensure CPUs with identical SKUs but different suffixes are identical.

  • No longer mark the drive bay as a blocker for M.2 slot on the side of the ASUS ROG ZENITH II Extreme Alpha motherboard.

  • CPUs installed in the GIGABYTE Z690i AORUS ULTRA PLUS get blocked by the socket when the socket is locked.

  • Thermal paste slot added to the GIGABYTE Z690i AORUS ULTRA PLUS motherboard.

  • GIGABYTE Z690i AORUS ULTRA PLUS motherboard model updated to use the correct socket.

  • The radiator slot moved in the Silverstone RL08 case to stop clipping with case geometry.

  • Changed LED display on the NZXT Kraken Z37 to alter material attributes rather than shared material.

  • Removed excess bottom radiator slots on the Raijintek ERIS EVO case.

  • Made the support bracket on the HAF 700 EVO removable to allow the back radiators to fit.

  • Added Fractal Design Meshify 2 Dark TG (Tempered Glass) Case variant.

  • The Palit GeForce RTX 3090 Ti GameRock and Palit GeForce RTX 3090 Ti GameRock OC GPUs will now use the correct power connector adapter.

  • Fixed an issue with PSU cables clipping through Raijintek PAEAN M case.

  • Fixed an issue with some radiators clipping through the Cooler Master HAF 700 EVO case.

  • Fixed an issue with some radiators clipping through front bottom slot on Raijintek ERIS EVO case.

Career Mode

  • The budget for Watercooling Motherboard jobs will now correctly include the price of the motherboard block.

  • Fixed an issue where random jobs involving water-cooling motherboards would sometimes grant no reward.


  • Improved the clarity of several job objective strings.

Stay up to date!

Got a blue screen? Maybe a blue case? Accidentally painted the window too? Get somebody to listen - join us on all of our official platforms here:


The PC Building Simulator Team


bottom of page